POLI tecnico di
MI lano
 
:: Home
:: Curriculum Vitae
:: Courses
:: Publications
   - Journals
   - Conferences
   - Other Publications
   - Patents
:: Download Area 
Research Labs:
:: POLI-Rotorcraft
:: POLI-Wind
 

BOOK EDITORSHIP

  1. C.L. Bottasso (Ed.), ‘Multibody Dynamics — Computational Methods and Applications’, Computational Methods in Applied Sciences, ISBN 978-1-4020-8828-5, Springer-Verlag, Dordrecht, The Netherlands, 2008. [link on Springer's web site]

PEER-REVIEWED JOURNALS AND BOOK CHAPTERS

  1. E. Zanenga, D. Leonello, C.L. Bottasso, `Feasibility Study of Rotorcraft Fire Fighting for High-Rise Buildings', Journal of Aerospace Engineering, doi:10.1061/(ASCE)AS.1943-5525.0000021, accepted, to appear.
  2. B.I. Prilutsky, A.N. Klishko, B. Farrell, L. Harley, G. Phillips, C.L. Bottasso, `Movement Coordination in Skilled Tasks: Insights from Optimization', Advances in Neuromuscular Physiology of Motor Skills and Muscle Fatigue, M. Shinohara, Ed., ISBN 978-81-308-0365-4, Transworld Research Network, 2009.
  3. C.L. Bottasso, F. Luraghi, G. Maisano, `A Unified Approach to Trajectory Optimization and Parameter Estimation in Vehicle Dynamics', Coupled Methods in Numerical Dynamics, Z. Terze, C. Lacor, Eds., ISBN 978-953-6313-30-3, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, Croatia, 2009.
  4. O.A. Bauchau, A. Epple, C.L. Bottasso, `Scaling of Constraints and Augmented Lagrangian Formulations in Multibody Dynamics Simulations', ASME Journal of Computational and Nonlinear Dynamics, 4:021007 (9 pages), 2009.
  5. C.L. Bottasso, ‘Solution Procedures for Maneuvering Multibody Dynamics Problems for Vehicle Models of Varying Complexity’, Multibody Dynamics — Computational Methods and Applications, C.L. Bottasso, Ed., Computational Methods in Applied Sciences, ISBN 978-1-4020-8828-5, Springer-Verlag, Dordrecht, The Netherlands, 2008.
  6. C.L. Bottasso, ‘Simulazione Multicorpo di Elicotteri’, Cinematica e Dinamica dei Sistemi Multibody, Vol. II, F. Cheli, E. Pennestri;, Eds., ISBN TBD, Casa Editrice Ambrosiana, Milano, 2008, in press.
  7. C.L. Bottasso, F. Scorcelletti, M. Ruzzene, S.S. Ahn, ‘Trajectory Optimization for DDE Models of Supercavitating Underwater Vehicles’, ASME Journal of Dynamic Systems, Measurement, and Control, 13:011009 (18 pages), 2009.
  8. C.L. Bottasso, A. Croce, R. Nicastro, B. Savini, L. Riviello, ‘Adaptive Reference-Augmented Predictive Control, with Application to the Reflexive Control of Unmanned Rotorcraft Vehicles’, Automatic Control in Aerospace, ISSN 1974-5168, 2, 2008.
  9. C.L. Bottasso, D. Leonello, B. Savini, ‘Path Planning for Autonomous Vehicles by Trajectory Smoothing using Motion Primitives’, IEEE Transactions on Control Systems Technology, 16:1152–1168, 2008. Also: Scientific Report DIA-SR 08-11, Dipartimento di Ingegneria Aerospaziale, Politecnico di Milano, June 2008.
  10. M. Ruzzene, R. Kamada, C.L. Bottasso, F. Scorcelletti, ‘Trajectory Optimization Strategies for Supercavitating Underwater Vehicles’, Journal of Vibration and Control, 14:611– 644, 2008.
  11. C.L. Bottasso, D. Dopico, L. Trainelli, `On the Optimal Scaling of Index Three DAEs in Multibody Dynamics', Multibody Systems Dynamics, 19:3-20, 2008.
  12. C.L. Bottasso, L. Riviello, `Trim of Rotorcraft Multibody Models by a Neural-Augmented Model-Predictive Auto-Pilot', Multibody Systems Dynamics, invited paper, 10th Anniversary Issue, 18:299-321, 2007.
  13. N. Acikgoz, C.L. Bottasso, `Metric-Driven Mesh Optimization using a Local Simulated Annealing Algorithm', International Journal for Numerical Methods in Engineering, 71:201-223, 2007.
  14. C.L. Bottasso, O.A. Bauchau, A. Cardona, `Time-Step-Size-Independent Conditioning and Sensitivity to Perturbations in the Numerical Solution of Index Three Differential Algebraic Equations', SIAM Journal on Scientific Computing, 29:397-414, 2007.
  15. N. Acikgoz, C.L. Bottasso, `A Unified Approach to the Deformation of Simplicial and Non-Simplicial Meshes in Two and Three Dimensions with Guaranteed Validity', Computers & Structures, 85:944-954, 2007 (special issues in occasion of the Fourth M.I.T. Conference on Computational Fluid and Solid Mechanics, Massachusetts Institute of Technology, Cambridge, MA, USA, June 13-15, 2007).
  16. C.L. Bottasso, A. Croce, D. Leonello, `Neural-Augmented Planning and Tracking Pilots for Maneuvering Multibody Dynamics', Multibody Dynamics. Computational Methods and Applications, J.C. García Orden, J.M. Goicolea, J. Cuadrado, Eds., Computational Methods in Applied Sciences, ISBN 1-4020-5683-4, Springer-Verlag, Dordrecht, The Netherlands, 2007.
  17. C.L. Bottasso, `Towards Maneuvering Aeroelasticity - Progress in the Simulation of Large Fluid-Structure Interaction Problems', Computational Mechanics - Solid, Structures and Coupled Problems, C.A. Mota Soares, J.A.C. Martins, J.A.C. Ambrósio, Eds., ISBN 1-4020-4978-1, Springer, Dordrecht, The Netherlands, 2006.
  18. C.L. Bottasso, A. Croce, B. Savini, W. Sirchi, L. Trainelli, `Aero-servo-elastic Modeling and Control of Wind Turbines using Finite Element Multibody Procedures', Multibody Systems Dynamics, 16:291-308, 2006.
  19. C.L. Bottasso, A. Croce, E. Imberti, B.I. Prilutsky, S. Sartirana, `A Numerical Procedure for Inferring from Experimental Data the Optimization Cost Functions using a Multibody Model of the Neuro-Musculoskeletal System', Multibody Systems Dynamics, 16:123-154, 2006.
  20. C.L. Bottasso, A. Tasora, `Problemi di Contatto nei Sistemi Multicorpo', Cinematica e Dinamica dei Sistemi Multibody, F. Cheli, E. Pennestrì, Eds., ISBN 88-408-1345-4, Casa Editrice Ambrosiana, Milano, 447-477, 2006.
  21. G. Maisano, S. Micheletti, S. Perotto, C.L. Bottasso, `On Some New Recovery Based a Posteriori Error Estimators', Computer Methods in Applied Mechanics and Engineering, invited paper in the John H. Argyris Memorial Issue, 195:4794-4815, 2006.
  22. C.L. Bottasso, C.-S. Chang, A. Croce, D. Leonello, L. Riviello, `Adaptive Planning and Tracking of Trajectories for the Simulation of Maneuvers with Multibody Models', Computer Methods in Applied Mechanics and Engineering, invited paper, Special Issue on Computational Multibody Dynamics, 195:7052-7072, 2006.
  23. P. Causin, R. Sacco, C.L. Bottasso, `Flux-Upwind Stabilization of the Discontinuous Petrov-Galerkin Formulation with Lagrange Multipliers for Advection-Diffusion Problems', ESAIM: Mathematical Modelling and Numerical Analysis (M2AN), 39:1087-1114, 2005.
  24. C.L. Bottasso, D. Detomi, R. Serra, `The Ball-Vertex Method: a New Simple Spring Analogy Method for Unstructured Dynamic Meshes', Computer Methods in Applied Mechanics and Engineering, 194:4244-4264, 2005.
  25. C.L. Bottasso, A. Croce, D. Leonello, L. Riviello, `Optimization of Critical Trajectories for Rotorcraft Vehicles', Journal of the American Helicopter Society, 50:165-177, 2005.
  26. C.L. Bottasso, A. Croce, D. Leonello, L. Riviello, `Rotorcraft Trajectory Optimization with Realizability Considerations', Journal of Aerospace Engineering, 18:146-155, 2005.
  27. C.L. Bottasso, S. Micheletti, R. Sacco, `A Multiscale Formulation of the Discontinuous Petrov-Galerkin Method for Advective-Diffusive Problems', Computer Methods in Applied Mechanics and Engineering, 194:2819-2838, 2005.
  28. C.L. Bottasso, A. Croce, `Optimal Control of Multibody Systems using an Energy Preserving Direct Transcription Method', Multibody Systems Dynamics, 12:17-45, 2004.
  29. C.L. Bottasso, L. Trainelli, `An Attempt at the Classification of Energy Decaying Schemes for Structural and Multibody Dynamics', Multibody Systems Dynamics, 12:173-185, 2004.
  30. C.L. Bottasso, `Anisotropic Mesh Adaption by Metric-Driven Optimization', International Journal for Numerical Methods in Engineering, 60:597-639, 2004.
  31. C.L. Bottasso, A. Croce, L. Ghezzi, P. Faure, `On the Solution of Inverse Dynamics and Trajectory Optimization Problems For Multibody Systems', Multibody Systems Dynamics, 11:1-22, 2004.
  32. M. Borri, C.L. Bottasso, L. Trainelli, `An Invariant-Preserving Approach to Robust Finite-Element Multibody Simulation', ZAMM, Zeitschrift für Angewandte Mathematik und Mechanik, 83:663-676, 2003.
  33. O.A. Bauchau, C.L. Bottasso, L. Trainelli, `Robust Integration Schemes for Flexible Multibody Systems', Computer Methods in Applied Mechanics and Engineering, 192:395-420, 2003.
  34. C.L. Bottasso, `Multiscale Temporal Integration', Computer Methods in Applied Mechanics and Engineering, 191:2815-2830, 2002.
  35. C.L. Bottasso, M. Borri, L. Trainelli, `Geometric Invariance', Computational Mechanics, 29:163-169, 2002.
  36. O.A. Bauchau, J.Y. Choi, C.L. Bottasso, `On the Modeling of Shells in Multibody Dynamics', Multibody Systems Dynamics, 8:459-489, 2002. Also: ICASE Report No. 2000-42, Institute for Computer Applications in Science and Engineering, NASA Langley Research Center, Hampton, VA, USA, November, 2000.
  37. C.L. Bottasso, O.A. Bauchau, J.Y. Choi, `An Energy Decaying Scheme for Nonlinear Dynamics of Shells', Computer Methods in Applied Mechanics and Engineering, 191:3099-3121, 2002. Also: ICASE Report No. 2000-43, Institute for Computer Applications in Science and Engineering, NASA Langley Research Center, Hampton, VA, USA, November, 2000.
  38. C.L. Bottasso, S. Micheletti, R. Sacco, `The Discontinuous Petrov-Galerkin Method for Elliptic Problems', Computer Methods in Applied Mechanics and Engineering, 191:3391-3409, 2002.
  39. C.L. Bottasso, D. Detomi, `A Procedure for Tetrahedral Boundary Layer Mesh Generation', Engineering with Computers, 18:66-79, 2002.
  40. O.A. Bauchau, J.Y. Choi, C.L. Bottasso, `Time Integrators for Shells in Multibody Dynamics', Computers & Structures, 80:871-889, 2002.
  41. M. Borri, C.L. Bottasso, L. Trainelli, `A Novel Momentum-Preserving Energy-Decaying Algorithm for Finite-Element Multibody Procedures', Computer Assisted Mechanics and Engineering Sciences, 9:315-340, 2002.
  42. C.L. Bottasso, L. Trainelli, `Implementation of Effective Procedures for Unilateral Contact Modeling in Multibody Dynamics', Mechanics Research Communications, 28:233-246, 2001.
  43. C.L. Bottasso, O.A. Bauchau, `Multibody Modeling of Engage and Disengage Operations of Helicopter Rotors', Journal of the American Helicopter Society, 46:290-300, 2001.
  44. O.A. Bauchau, J. Rodriguez, C.L. Bottasso, `Modeling of Unilateral Contact Conditions with Application to Aerospace Systems Involving Backlash, Freeplay and Friction', Mechanics Research Communications, 28:571-599, 2001.
  45. O.A. Bauchau, C.L. Bottasso, `Contact Conditions for Cylindrical, Prismatic, and Screw Joints in Flexible Multi-Body Systems', Multibody Systems Dynamics, 5:251-278, 2001.
  46. C.L. Bottasso, M. Borri, L. Trainelli, `Integration of Elastic Multibody Systems by Invariant Conserving/Dissipating Schemes. Part I Formulation', Computer Methods in Applied Mechanics and Engineering, 190:3669-3699, 2001.
  47. C.L. Bottasso, M. Borri, L. Trainelli, `Integration of Elastic Multibody Systems by Invariant Conserving/Dissipating Schemes. Part II Numerical Schemes and Applications', Computer Methods in Applied Mechanics and Engineering, 190:3701-3733, 2001.
  48. M. Borri, C.L. Bottasso, L. Trainelli, `An Embedded Projection Method for Index-3 Constrained Mechanical Systems', Computational Aspects of Nonlinear Structural Systems with Large Rigid Body Motion, J.A.C. Ambrósio, M. Kleiber, Eds., NATO Science Series, Series III: Computer and Systems Sciences, Vol. 179, IOS Press, 2001.
  49. O.A. Bauchau, C.L. Bottasso, Y.G. Nikishkov, `Modeling Rotorcraft Dynamics with Finite Element Multibody Procedures', Mathematics and Computer Modeling, 33:1113-1137, 2001.
  50. C.L. Bottasso, A. Ragazzi, `Deferred Correction Optimal Control with Applications to Inverse Problems in Flight Mechanics', Journal of Guidance, Control, and Dynamics, 24:101-108, 2001.
  51. C.L. Bottasso, A. Ragazzi, `Finite Element and Runge-Kutta Methods for Boundary Value and Optimal Control Problems', Journal of Guidance, Control, and Dynamics, 23, 2000.
  52. M. Borri, L. Trainelli, C.L. Bottasso, `On Representations and Parameterizations of Motion', Multibody Systems Dynamics, 4:129-193, 2000.
  53. C.L. Bottasso, M.S. Shephard, `Finite Element Adaptive Multigrid Euler Solver for Rotary Wing Aerodynamics', AIAA Journal, 38:50-56, 2000.
  54. C.L. Bottasso, M. Borri, `Some Recent Developments in the Theory of Finite Elements in Time', Computer Modeling and Simulation in Engineering, 4:201-205, 1999.
  55. C.L. Bottasso, O.A. Bauchau, `On the Design of Energy Preserving and Decaying Schemes for Flexible, Nonlinear Multibody Systems', Computer Methods in Applied Mechanics and Engineering, 169:61-79, 1999.
  56. C.L. Bottasso, M. Borri, `Integrating Finite Rotations', Computer Methods in Applied Mechanics and Engineering, 164:307-331, 1998.
  57. C.L. Bottasso, O. Klaas, M.S. Shephard, `Data Structures and Mesh Modification Tools for Unstructured Multigrid Adaptive Techniques', Engineering with Computers, 14:235-247, 1998.
  58. M. S. Shephard, J. E. Flaherty, H. L. de Cougny, C. L. Bottasso and C. Özturan, `Parallel Automatic Mesh Generation and Adaptive Mesh Control', Solving Large Scale Problems in Mechanics: Parallel and Distributed Computer Applications, M. Papadrakakis, Ed., John Wiley & Sons, Ltd, Chichester, 1997.
  59. C.L. Bottasso, `A New Look at Finite Elements in Time: A Variational Interpretation of Runge-Kutta Methods', Applied Numerical Mathematics, 25:355-368, 1997.
  60. C.L. Bottasso, M. Borri, `Energy Preserving/Decaying Schemes for Non-Linear Beam Dynamics using the Helicoidal Approximation', Computer Methods in Applied Mechanics and Engineering, 143:393-415, 1997.
  61. C.L. Bottasso, M.S. Shephard, `A Parallel Adaptive Finite Element Euler Flow Solver for Rotary Wing Aerodynamics', AIAA Journal, 35(6):937-944, 1997.
  62. M. S. Shephard, J. E. Flaherty, C. L. Bottasso, H. L. de Cougny, C. Özturan and M. L. Simone, `Parallel Automatic Adaptive Analysis', Parallel Computing, 23:1327-1347, 1997.
  63. M. Borri, C.L. Bottasso, F. Montelaghi, `A Numerical Approach to Inverse Flight Dynamics', Journal of Guidance, Control, and Dynamics, 20(4):1-6, 1997.
  64. C.L. Bottasso, `On the Computation of the Boundary Integral of Space-Time Deforming Finite Elements', Communications in Numerical Methods in Engineering, 13:53-59, 1997.
  65. M. Vasile, C.L. Bottasso, A. Ercoli Finzi, `Lunar Orbital Dynamics by Finite Elements in Time', Aerotecnica, Missili & Spazio, 75:69-76, 1996.
  66. C.L. Bottasso, `Sensitivity Analysis of the Non-Linear Dynamic Response of Beams using Space-Time Perturbation Modes', International Journal of Non-Linear Dynamics, 7:65-84, 1995.
  67. M.S. Shephard, J.E. Flaherty, H.L. de Cougny, C. Özturan, C.L. Bottasso, M.W. Beall, `Parallel Automated Adaptive Procedures for Unstructured Meshes', Parallel Computing in CFD, AGARD, 7 Rue Ancelle, 92200 Neuilly-Sur-Seine, France, 1995.
  68. C.L. Bottasso, J.E. Flaherty, C. Özturan, M.S. Shephard, B.K. Szymanski, J.D. Teresco, L.H. Ziantz, `The Quality of Partitions Produced by an Iterative Load Balancer', Languages, Compilers and Run-Time Systems for Scalable Computers, B.K. Szymanski and B. Sinharoy, Eds., Kluwer, Boston, 265-277, 1995.
  69. M. Borri, C.L. Bottasso, `An Intrinsic Beam Model Based on a Helicoidal Approximation - Part I: Formulation', International Journal for Numerical Methods in Engineering, 37:2267-2289, 1994.
  70. M. Borri, C.L. Bottasso, `An Intrinsic Beam Model Based on a Helicoidal Approximation - Part II: Linearization and Finite Element Implementation', International Journal for Numerical Methods in Engineering, 37:2291-2309, 1994.
  71. O.A. Bauchau, C.L. Bottasso, `Space-Time Perturbation Modes for Non-Linear Dynamic Analysis of Beams', International Journal of Non-Linear Dynamics, 6:21-35, 1994.
  72. M. Borri, C.L. Bottasso, `Petrov-Galerkin Finite Elements in Time for Rigid Body Dynamics', Journal of Guidance, Control, and Dynamics, 17(5):1061-1067, 1994.
  73. M.S. Shephard, C.L. Bottasso, H.L. de Cougny, C. Özturan, `Parallel Adaptive Finite Element Analysis of Fluid Flows on Distributed Memory Computers', Recent Developments in Finite Element Analysis: a Book Dedicated to Robert L. Taylor, T.J.R. Hughes, E. Oñate and O.C. Zienkiewicz, Eds., International Center for Numerical Methods in Engineering, Barcelona, Spain, 205-214, 1994.
  74. M. Borri, C.L. Bottasso, `A General Framework for Interpreting Time Finite Element Formulations', Computational Mechanics, 13:133-142, 1993.
  75. C.L. Bottasso, `A Non-Linear Beam Space-Time Finite Element Formulation using Quaternion Algebra: Interpolation of the Lagrange Multipliers and the Appearance of Spurious Modes', Computational Mechanics, 10:359-368, 1992.
  76. M. Borri, C.L. Bottasso, P. Mantegazza, `A Modified Phase Space Formulation for Constrained Mechanical Systems - Differential Approach', European Journal of Mechanics - A/Solids, 11(5):701-727, 1992.
  77. M. Borri, C.L. Bottasso, P. Mantegazza, `Acceleration Projection Method in Multibody Dynamics', European Journal of Mechanics - A/Solids, 11(3):403-418, 1992.
  78. M. Borri, C.L. Bottasso, P. Mantegazza, `Equivalence of Kane's and Maggi's Equations', Meccanica, 25:272-274, 1991.
  79. M. Borri, C.L. Bottasso, P. Mantegazza, `Basic Features of the Time Finite Element Approach for Dynamics', Meccanica, 27:119-130, 1992.

Under review:

  1. C.L. Bottasso, A. Croce, C.E.D. Riboldi, Y. Nam, `Power Curve Tracking in the Presence of a Tip Speed Constraint', Renewable Energy, under review, 2009.
  2. C.L. Bottasso, F. Luraghi, A. Maffezzoli, G. Maisano, `Parameter Estimation of Multibody Models of Unstable Systems from Experimental Data, with Application to Rotorcraft Vehicles', ASME Journal of Computational and Nonlinear Dynamics, under review, 2009.
  3. C.L. Bottasso, `Computational Dynamics', Encyclopedia of Aerospace Engineering, R. Blockley, W. Shyy, Eds., John Wiley & Sons, Ltd, under review, 2009.
  4. C.L. Bottasso, G. Maisano, F. Scorcelletti, `Trajectory Optimization Procedures for Rotorcraft Vehicles, their Software Implementation and Applicability to Models of Varying Complexity', Journal of the American Helicopter Society, under review, 2008.
  5. C.L. Bottasso, L. Riviello, M. Ruzzene, F. Scorcelletti, `A Direct Multiple Shooting Approach to the Solution of Optimal Control Problems with Time-Delays', Mathematics and Computer Modeling, under review, 2009.
  6. S.S. Ahn, M. Ruzzene, F. Scorcelletti, C.L. Bottasso, ‘Configuration Optimization of Supercavitating Underwater Vehicles with Maneuvering Constraints’, IEEE Journal of Oceanic Engineering, under review, 2007.

CONFERENCE PROCEEDINGS

Invited plenary and keynote lectures:
  1. C.L. Bottasso, F. Luraghi, G. Maisano, `A Unified Approach to Trajectory Optimization and Parameter Estimation in Vehicle Dynamics', Plenary lecture, CMND 2009, International Symposium on Coupled Methods in Numerical Dynamics, Split, Croatia, September 16-19, 2009.
  2. C.L. Bottasso, F. Luraghi, G. Maisano, `Identification of Non-Linear Aeroelastic Models from Experimental Data: Methods And Applications', Keynote lecture, COMPDYN 2009, Computational Methods in Structural Dynamics and Earthquake Engineering, Rhodes, Greece, June 22-24, 2009.
  3. C.L. Bottasso, `Numerical Simulation of Aero-Servo-Elastic Problems, with Application to Wind Turbines and Rotary Wing Vehicles', invited keynote lecture, COMPDYN 2007, Computational Methods in Structural Dynamics and Earthquake Engineering, Rethymno, Crete, Greece, June 13-15, 2007.
  4. C.L. Bottasso, `Towards Maneuvering Aeroelasticity - Progress in the Simulation of Large Fluid-Structure Interaction Problems', Keynote lecture, III European Conference on Computational Solid and Structural Mechanics ECCM 2006, Lisbon, Portugal, June 5-9, 2006.
  5. C.L. Bottasso, `Virtual Pilots for Maneuver Modeling and Simulation in Vehicle Dynamics', Plenary lecture, International Conference on CAE and Computational Technologies for Industry, Lecce, Italy, October 5-8, 2005.
  6. C.L. Bottasso, O.A. Bauchau, `A Simple Way to Improve the Sensitivity to Perturbations in the Numerical Solution of High Index Stiff Differential Algebraic Equations', Keynote lecture, Third M.I.T. Conference on Computational Fluid and Solid Mechanics, Massachusetts Institute of Technology, Cambridge, MA, USA, June 14-17, 2005.
  7. C.L. Bottasso, `Methods and Applications in Coupled Engineering Simulations', Keynote lecture, VII U.S. National Congress on Computational Mechanics, USACM, Albuquerque, NM, USA, July 27 - July 31, 2003.
  8. M. Borri, C.L. Bottasso, `The Exponential Map of Motion - Theory and Applications', Keynote lecture, IV World Congress on Computational Mechanics, Buenos Aires, Argentina, June 29 - July 2, 1998.

Conference proceedings:
  1. C.L. Bottasso, G. Maisano, `Efficient Rotorcraft Trajectory Optimization using Comprehensive Vehicle Models by Improved Shooting Methods', 35th European Rotorcraft Forum, Hamburg, Germany, September 22-25, 2009.
  2. C.L. Bottasso, D. Leonello, `Inertial Navigation of an Autonomous Rotorcraft Vehicle using Stereo-Vision', 35th European Rotorcraft Forum, Hamburg, Germany, September 22-25, 2009.
  3. C.L. Bottasso, F. Luraghi, G. Maisano, `On Time-Domain Parameter Estimation Techniques Applicable to First-Principle Rotorcraft Models', 35th European Rotorcraft Forum, Hamburg, Germany, September 22-25, 2009.
  4. C.L. Bottasso, F. Campagnolo, A. Croce, M. Giuliani, `Multi-Disciplinary Optimization of Wind Turbines using Comprehensive Aero-Servo-Elastic Models', EACWE 5, Fifth European and African Conference on Wind Engineering, Florence, Italy, July 19-23, 2009.
  5. C.L. Bottasso, A. Croce, C. Riboldi, `Computing Spatial Estimates of the Over-the-Rotor Wind Distribution for Advanced Wind Turbine Active Control', EACWE 5, Fifth European and African Conference on Wind Engineering, Florence, Italy, July 19-23, 2009.
  6. C.L. Bottasso, G. Maisano, F. Scorcelletti, `Maneuvering Multibody Dynamics - New Developments for Models with Fast Solution Scales and Pilot-in-the-Loop Effects', ECCOMAS Thematic Conference on Multibody Dynamics, Warsaw, Poland, June 29-July 2, 2009.
  7. C.L. Bottasso, F. Luraghi, G. Maisano, `Parameter Estimation of Non-linear Unstable Multibody Models from Experimental Data, with Application to Rotorcraft Vehicles', ECCOMAS Thematic Conference on Multibody Dynamics, Warsaw, Poland, June 29-July 2, 2009.
  8. O.A. Bauchau, A. Epple, C.L. Bottasso, `Scaling of Constraints and Augmented Lagrangian Formulations in Multibody Dynamics Simulations', ECCOMAS Thematic Conference on Multibody Dynamics, Warsaw, Poland, June 29-July 2, 2009.
  9. C.L. Bottasso, G. Maisano, `A New Single-Multiple Shooting Method for Trajectory Optimization of Complex Rotorcraft Models', XX AIDAA National Conference, Milano, Italy, June 29-July 3, 2009.
  10. C.L. Bottasso, D. Leonello, A. Maffezzoli, F. Riccardi, `A Procedure for the Identification of the Inertial Properties of Small-Size UAVs', XX AIDAA National Conference, Milano, Italy, June 29-July 3, 2009.
  11. C.L. Bottasso, D. Leonello, `Stereo-Vision-Augmented Inertial Navigation for Autonomous Vehicles', XX AIDAA National Conference, Milano, Italy, June 29-July 3, 2009.
  12. C.L. Bottasso, F. Luraghi, G. Maisano, `Time-Domain Parameter Estimation from Flight Test Data for First-Principle Rotorcraft Models', XX AIDAA National Conference, Milano, Italy, June 29-July 3, 2009.
  13. C.L. Bottasso, G. Maisano, F. Scorcelletti, `Trajectory Optimization of Rotorcraft Vehicles Including Pilot-in-the-Loop Effects', XX AIDAA National Conference, Milano, Italy, June 29-July 3, 2009.
  14. C.L. Bottasso, G. Maisano, F. Scorcelletti, `Trajectory Optimization of Rotorcraft Including Pilot Models, with Applications to ADS-33 MTEs, Cat-A Procedures and Engine Off Landings', American Helicopter Society 65th Annual Forum and Technology Display, Gaylord Texan Convention Center, Grapevine, TX, USA, May 27-29, 2009.
  15. C.L. Bottasso, D. Leonello, ‘Vision-Aided Inertial Navigation by Sensor Fusion for an Autonomous Rotorcraft Vehicle’, AHS International Specialists’ Meeting on Unmanned Rotorcraft, Scottsdale, AZ, USA, January 20–22, 2009.
  16. C.L. Bottasso, A. Croce, C.E.D. Riboldi, G.S. Bir, `Real-Time Estimation of Structural and Wind States for Wind Turbine Advanced Control', EWEC 2009, European Wind Energy Conference & Exhibition, Marseille, France, March 16-19, 2009.
  17. G.S. Bir, C.L. Bottasso, A. Croce, L.C. Henriksen, `Model Updating of Wind Turbine Blades using Maximum Likelihood Constrained Optimization', EWEC 2009, European Wind Energy Conference & Exhibition, Marseille, France, March 16-19, 2009.
  18. C.L. Bottasso, F. Scorcelletti, G. Maisano, M. Cicalè, A. Ragazzi, ‘Mission Task Elements and Critical Maneuvers Simulation for Rotorcraft Vehicles’, Rotorcraft Handling Qualities Conference, University of Liverpool, Liverpool, UK, November 4–6, 2008.
  19. C.L. Bottasso, F. Scorcelletti, G. Maisano, A. Ragazzi, ‘Trajectory Optimization Strategies for the Simulation of ADS-33 Mission Task Elements’, 34th European Rotorcraft Forum, Liverpool, UK, September 16–19, 2008.
  20. C.L. Bottasso, A. Croce, D. Leonello, G. Maisano, L. Riviello, ‘Trajectory Optimization of Rotorcraft Vehicles: from Flight Mechanics to Aero-Servo-Elastic Models’, SIMAI 2008, Roma, Italy, September 15–19, 2008.
  21. C.L. Bottasso, G. Maisano, F. Scorcelletti, ‘Trajectory Optimization Procedures for Rotorcraft Vehicles, their Software Implementation and Applicability to Models of Varying Complexity’, AHS 64th Annual Forum and Technology Display, Montreal, Canada, April 29 – May 1, 2008.
  22. O.A. Bauchau, L. Riviello, C.L. Bottasso, ‘Effect of Modeling Approximations on the Stability of Autopilot Controllers’, AHS 64th Annual Forum and Technology Display, Montr´eal, Canada, April 29 – May 1, 2008.
  23. L. Riviello, C.L. Bottasso, `Tackling the Simulation of Multibody Rotorcraft Models in Maneuvering Flight by Parameter Identification', Proceedings the AHS Specialists' Conference on Aeromechanics, San Francisco, USA, January 23-25, 2008.
  24. C.L. Bottasso, R. Nicastro, B. Savini, L. Riviello, `Adaptive Reference-Augmented Control for Autonomous Rotorcraft Applications', XIX AIDAA National Conference, Forlì, September 17-21, 2007.
  25. C.L. Bottasso, D. Leonello, B. Savini, `Motion Planning by Trajectory Smoothing with Motion Primitives', XIX AIDAA National Conference, Forlì, September 17-21, 2007.
  26. C.L. Bottasso, B. Savini, L. Fossati, `Development of a Test-Bed for Simulation and Control of Autonomous Rotorcraft Vehicles', XIX AIDAA National Conference, Forlì, September 17-21, 2007.
  27. C.L. Bottasso, F. Luraghi, `Identification of the Stabilization Parameter for Finite Element Discretizations of Advection-Diffusion Problems using a Neural Network', XIX AIDAA National Conference, Forlì, September 17-21, 2007.
  28. F. Scorcelletti, C.L. Bottasso, M. Ruzzene, `Multiple Shooting Solution of Optimal Control Problems for Time-Delayed Dynamic System', XIX AIDAA National Conference, Forlì, September 17-21, 2007.
  29. C.L. Bottasso, G. Maisano, `Multi-Model, Multi-Approach Software for Helicopter Trajectory Optimization', XIX AIDAA National Conference, Forlì, September 17-21, 2007.
  30. C.L. Bottasso, A. Croce, B. Savini, `Performance Comparison of Control Schemes for Variable-Speed Wind Turbines', The Science of Making Torque from Wind, TWIND 2007, The Technical University of Denmark, Lyngby, Denmark, August 28-31, 2007.
  31. C.L. Bottasso, F. Luraghi, `Neural Network Stabilized Finite Elements', IX U.S. National Congress on Computational Mechanics, USACM, San Francisco, CA, USA, July 23-26, 2007.
  32. C.L. Bottasso, R. Nicastro, L. Riviello, B. Savini, `Adaptive Reference-Augmented Predictive Control', 2007 American Control Conference, New York, NY, USA, July 11-13, 2007.
  33. C.L. Bottasso, L. Riviello, `Conditions for the Solution of Maneuvering Multibody Dynamics Problems', ECCOMAS Multibody Dynamics 2007, Milano, Italy, June 25-28, 2007.
  34. N. Acikgoz, C.L. Bottasso, `A Unified Approach to the Deformation of Simplicial and Non-Simplicial Meshes in Two and Three Dimensions with Guaranteed Validity', Fourth M.I.T. Conference on Computational Fluid and Solid Mechanics, Massachusetts Institute of Technology, Cambridge, MA, USA, June 13-15, 2007.
  35. C.L. Bottasso, A. Croce, B. Savini, L. Riviello, `Performance Comparison of Control Schemes for Variable-Speed Pitch-Regulated Wind Turbines', EWEC 2007, European Wind Energy Conference & Exhibition, Milano, Italy, May 7-10, 2007.
  36. C.L. Bottasso, A. Croce, R. Nicastro, L. Riviello, B. Savini, `Adaptive Augmented Control of Unmanned Rotorcraft Vehicles', AHS International Specialists' Meeting on Unmanned Rotorcraft, Phoenix, AZ, USA, January 23-25, 2007.
  37. C.L. Bottasso, D. Leonello, B. Savini, `Trajectory Planning for UAVs by Smoothing with Motion Primitives', AHS International Specialists' Meeting on Unmanned Rotorcraft, Phoenix, AZ, USA, January 23-25, 2007.
  38. C.L. Bottasso, `Maneuver Modeling and Simulation in Vehicle Dynamics', Virtual Test & Engineering Simulation in Aerospace Industry, Italian Air Force Headquarters, Roma, Italy, November 29-30, 2006.
  39. L. Trainelli, C.L. Bottasso, `Optimal Scaling of High Index DAEs', NumDiff 11, 11th Seminar on Numerical Solution of Differential and Differential-Algebraic Equations, Halle, Germany, September 4-8, 2006.
  40. C.L. Bottasso, A. Croce, R. Nicastro, B. Savini, L. Riviello, `Neural Adaptive Control of Multibody Systems', ACMD06, 3rd Asian Conference on Multibody Dynamics, Komaba, Tokyo, Japan, August 1-4, 2006.
  41. C.L. Bottasso, D. Dopico, L. Trainelli, `Optimal Preconditioners for the Solution of Constrained Mechanical Systems in Index-3 Form', ACMD06, 3rd Asian Conference on Multibody Dynamics, Komaba, Tokyo, Japan, August 1-4, 2006.
  42. C.L. Bottasso, `Navigation and Control of Autonomous Vehicles with Integrated Flight Envelope Protection', CRUI-ACARE Workshop, Napoli, Italy, July 14, 2006.
  43. M. Ruzzene, C.L. Bottasso, `Configuration Design and Trajectory Optimization for Supercavitating Torpedoes', Supercavitating Torpedo and Multi-Disciplinary Systems Design and Optimization Workshop, Whispering Pines Conference Center, RI, June 20-22, 2006.
  44. C.L. Bottasso, D. Dopico, L. Trainelli, `On the Optimal Scaling of Index Three DAEs in Multibody Dynamics', III European Conference on Computational Solid and Structural Mechanics ECCM 2006, Lisbon, Portugal, June 5-9, 2006.
  45. C.L. Bottasso, L. Riviello, `Rotorcraft Trim by a Neural Model-Predictive Auto-Pilot', Cheeseman Award Winner Presentation, AHS 62nd Annual Forum & Technology Display, Phoenix, AZ, May 9-11, 2006.
  46. C.L. Bottasso, `Multibody Dynamics for Aero-Servo-Elasticity and Flight Mechanics of Rotorcraft', Primo Workshop sulla Dinamica dei Sistemi Multibody, Paestum, Salerno, Italy, April 27-28, 2006.
  47. C.L. Bottasso, A. Croce, B. Savini, `Adaptive Model Predictive Control of Wind Turbines', EWEC 2006, European Wind Energy Conference & Exhibition, Athens, Greece, February 27 - March 2, 2006.
  48. C.L. Bottasso, A. Croce, R. Nicastro, L. Riviello, B. Savini, `Neural Adaptive Control of Multibody Systems', EUROMECH Colloquium 476, Ferrol, Spain, March 13-16, 2006.
  49. N. Acikgoz, C.L. Bottasso, `A New Mesh Deformation Technique for Simplicial and Non Simplicial Meshes', 44th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, USA, January 9-12, 2006.
  50. N. Acikgoz, C.L. Bottasso, `A Local Simulated Annealing Strategy for Mesh Optimization', 44th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, USA, January 9-12, 2006.
  51. C.L. Bottasso, A. Croce, D. Leonello, L. Riviello, B. Savini, `Adaptive Reduced Models for Predictive Control of Multibody Systems', 2nd Workshop on Numerical Methods in Multibody Dynamics, Bad Herrenalb, Germany, October 26-28, 2005.
  52. G. Maisano, S. Micheletti, S. Perotto, C.L. Bottasso, `Two New Recovery-Based Estimators Based on Roughened-Enriched Solutions', ADMOS 2005, International Conference on Adaptive Modeling and Simulation, Barcelona, Spain, September 8-10, 2005.
  53. C.L. Bottasso, L. Riviello, `Rotorcraft Trim by a Neural Model-Predictive Auto-Pilot', 31st European Rotorcraft Forum, Firenze, Italy, September 13-15, 2005. Winner of the Cheeseman Best Paper Award.
  54. C.L. Bottasso, A. Croce, D. Leonello, L. Riviello, `Procedures for Enabling the Simulation of Maneuvers with Comprehensive Codes', 31st European Rotorcraft Forum, Firenze, Italy, September 13-15, 2005.
  55. C.L. Bottasso, L. Riviello, `A Neural Model-Predictive Auto-Pilot for Rotorcraft Trim', XVIII AIDAA National Conference, Volterra, Pisa, September 19-22, 2005.
  56. C.L. Bottasso, A. Croce, D. Leonello, L. Riviello, `Adaptive Planning and Tracking of Trajectories for the Simulation of Maneuvering Rotorcraft with Comprehensive Models', XVIII AIDAA National Conference, Volterra, Pisa, September 19-22, 2005.
  57. C.L. Bottasso, O.A. Bauchau, `Reduced Sensitivity to Perturbations in the Numerical Solution of Multibody DAEs', IDETC/CIE 2005, ASME 2005 International Design Engineering Technical Conferences, Computers and Information in Engineering Conference, Long Beach, CA, USA, September 24-28, 2005.
  58. C.L. Bottasso, A. Croce, S. Sartirana, B.I. Prilutsky, `A Method for Inferring the Optimization Cost Function of Experimentally Observed Motor Strategies', IDETC/CIE 2005, ASME 2005 International Design Engineering Technical Conferences, Computers and Information in Engineering Conference, Long Beach, CA, USA, September 24-28, 2005.
  59. C.L. Bottasso, A. Croce, `Two-Level Model-Based Control of Flexible Multibody Systems', 6th European Conference on Structural Dynamics (EURODYN 2005), Paris, France, September 4-7, 2005.
  60. C.L. Bottasso, A. Croce, B. Savini, W. Sirchi, L. Trainelli, `Aeroelastic Modeling and Control of Wind Turbine Generators using Finite Element Multibody Procedures', ECCOMAS Multibody Dynamics 2005, Madrid, Spain, June 21-24, 2005.
  61. C.L. Bottasso, A. Croce, D. Leonello, `Neural-Augmented Planning and Tracking Pilots for Maneuvering Multibody Dynamics', ECCOMAS Multibody Dynamics 2005, Madrid, Spain, June 21-24, 2005.
  62. C.L. Bottasso, L. Riviello, `Trimming of Multibody Rotorcraft Models by a Neural Model-Predictive Auto-Pilot', ECCOMAS Multibody Dynamics 2005, Madrid, Spain, June 21-24, 2005.
  63. C.L. Bottasso, A. Croce, S. Sartirana, B.I. Prilutsky, `A Numerical Procedure for Identifying from Experimental Data the Optimization Cost Function of the Neuro-Musculoskeletal System', poster presentation, ECCOMAS Multibody Dynamics 2005, Madrid, Spain, June 21-24, 2005.
  64. C.L. Bottasso, O.A. Bauchau, `A Simple Way to Improve the Sensitivity to Perturbations in the Numerical Solution of High Index Stiff Differential Algebraic Equations', keynote lecture, Third M.I.T. Conference on Computational Fluid and Solid Mechanics, Massachusetts Institute of Technology, Cambridge, MA, USA, June 14-17, 2005.
  65. C.L. Bottasso, A. Croce, D. Leonello, L. Riviello, `Computational Procedures for the Simulation of Maneuvers', Third M.I.T. Conference on Computational Fluid and Solid Mechanics, Massachusetts Institute of Technology, Cambridge, MA, USA, June 14-17, 2005.
  66. G. Maisano, S. Micheletti, S. Perotto, C.L. Bottasso, `New Recovery Based Error Estimators Based on Solution Enrichment and Roughening', Third M.I.T. Conference on Computational Fluid and Solid Mechanics, Massachusetts Institute of Technology, Cambridge, MA, USA, June 14-17, 2005.
  67. C.L. Bottasso, A. Croce, B. Savini, W. Sirchi, L. Trainelli, `Aeroelastic Analysis and Control of Wind Turbine Generators', Eolica Expo Mediterranean 2004, Roma, Italy, September 30 - October 2, 2004.
  68. C.L. Bottasso, A. Croce, `Simulation and Control of Maneuvering Vehicles with Application to Rotorcraft Emergency Landings', SECTAM XXII, 22nd Southeastern Conference on Theoretical and Applied Mechanics, Tuskegee University, Tuskegee, AL, USA, August 15-17, 2004.
  69. P. Causin, R. Sacco, C.L. Bottasso, `The Discontinuous Petrov-Galerkin Formulation with Lagrange Multipliers for Advection-Diffusion Problems', Sixth World Congress on Computational Mechanics, Beijing, China, September 5-10, 2004.
  70. C.L. Bottasso, A. Croce, `Steering of Flexible Multibody Systems with Application to the Maneuvering Flight of Rotorcraft Vehicles', Sixth World Congress on Computational Mechanics, Beijing, China, September 5-10, 2004.
  71. P. Causin, R. Sacco, C.L. Bottasso, `An Upwind-Mixed Method for Advection-Diffusion Problems with Static Condensation', SIMAI 2004, Venezia, Italy, September 20-24, 2004.
  72. C.L. Bottasso, A. Croce, `On the Solution of Very Large Optimal Control Problems, with Application to the Simulation of Maneuvering Flight', SIMAI 2004, Venezia, Italy, September 20-24, 2004.
  73. C.L. Bottasso, A. Croce, D. Leonello, L. Riviello, `A Two-level Controller for the Simulation of Complex Maneuvers with Multibody Dynamics', GIMC 04, XV Convegno Italiano di Meccanica Computazionale, Genova, Italy, June 21-23, 2004.
  74. C.L. Bottasso, A. Croce, D. Leonello, L. Riviello, `Steering of Flexible Multibody Models with Application to the Simulation of Maneuvering Flight', ECCOMAS 2004, 4th European Congress on Computational Methods in Applied Sciences and Engineering, Jyväskylä, Finland, July 24-28, 2004.
  75. N. Acikgoz, C.L. Bottasso, D. Detomi, `Metric Based Mesh Optimization using Simulated Annealing', ECCOMAS 2004, 4th European Congress on Computational Methods in Applied Sciences and Engineering, Jyväskylä, Finland, July 24-28, 2004.
  76. C.L. Bottasso, A. Croce, D. Leonello, L. Riviello, `Computational Procedures for the Aeroelastic Simulation of Maneuvering Rotorcraft Vehicles', AHS 60th Annual Forum & Technology Display, Baltimore, MD, USA, June 8-10, 2004.
  77. C.L. Bottasso, A. Croce, D. Leonello, L. Riviello, `Optimization of Critical Trajectories for Rotorcraft Vehicles', AHS 60th Annual Forum & Technology Display, Baltimore, MD, USA, June 8-10, 2004.
  78. R. Kamada, M. Ruzzene, C.L. Bottasso, `Trajectory Optimization Strategies for Supercavitating Underwater Vehicles', 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Palm Springs, CA, USA, April 19-22, 2004.
  79. R. Sacco, C.L. Bottasso, P. Causin, `Upwind Stabilization of a Discontinuous Petrov-Galerkin Formulation with Lagrange Multipliers for Advection-Diffusion Problems', GNCS 2004, Montecatini Terme, Italy, February 9-11, 2004.
  80. C.L. Bottasso, A. Croce, `Aeroelastic Simulation of Maneuvering Rotorcraft', 10th International Workshop on Aeroelasticity of Rotorcraft Systems, D. Guggenheim School of Aerospace Engineering, Georgia Institute of Technology, Atlanta, GA, USA, November 3-4, 2003.
  81. C.L. Bottasso, `On the Choice of the Optimization Strategy and of the Objective Function for Metric-Driven Mesh Adaption', ADMOS 2003, International Conference on Adaptive Modeling and Simulation, Göteborg, Sweden, September 29 - October 1, 2003.
  82. C.L. Bottasso, D. Detomi, `Anisotropic Metric-Driven Mesh Adaption and Generation', XVII AIDAA National Conference, Rome, Italy, September 15-19, 2003.
  83. C.L. Bottasso, W. Sirchi, L. Trainelli, `On the Non-linear Effects of the Gimbal Design on the Aeroelastic Behavior of a Tilt Rotor', XVII AIDAA National Conference, Rome, Italy, September 15-19, 2003.
  84. C.L. Bottasso, A. Croce, D. Leonello, L. Riviello, `Trajectory Optimization of Critical Maneuvers for Rotorcraft Vehicles', XVII AIDAA National Conference, Rome, Italy, September 15-19, 2003.
  85. C.L. Bottasso, A. Croce, `On the Solution of Inverse Dynamics and Trajectory Optimization Problems For Multibody Systems using Energy-Consistent Methods', XVII AIDAA National Conference, Rome, Italy, September 15-19, 2003.
  86. M. Borri, C.L. Bottasso, L. Trainelli, `Recent Advances in Invariant Algorithms for Structural and Multibody Dynamics', XVII AIDAA National Conference, Rome, Italy, September 15-19, 2003.
  87. C.L. Bottasso, D. Detomi, R. Serra, `A New Method for Dynamic Meshes for Coupled Fluid-Structure Interaction Problems', XVII AIDAA National Conference, Rome, Italy, September 15-19, 2003.
  88. C.L. Bottasso, A. Croce, `Multibody Inverse Dynamics using an Energy Preserving Direct Transcription Process', IDETC03, ASME Design Engineering Technical Conferences, Chicago, IL, USA, September 2-6, 2003.
  89. C.L. Bottasso, D. Detomi, `A Multiscale View of the Galerkin Method in One Dimension: The p Version of the FEM Does not Require Stabilization', VII U.S. National Congress on Computational Mechanics, USACM, Albuquerque, NM, USA, July 27-31, 2003.
  90. C.L. Bottasso, D. Detomi, `A New Simple Spring Method for Three-Dimensional Unstructured Dynamic Meshes', VII U.S. National Congress on Computational Mechanics, USACM, Albuquerque, NM, USA, July 27-31, 2003.
  91. C.L. Bottasso, D. Detomi, `On the Choice of the Objective Function and Optimization Strategy for Metric Driven Mesh Adaption', VII U.S. National Congress on Computational Mechanics, USACM, Albuquerque, NM, USA, July 27-31, 2003.
  92. O.A. Bauchau, J. Rodriguez, C.L. Bottasso, `Modeling of Unilateral Contact Conditions with Application to Aerospace Systems Involving Backlash, Freeplay and Friction', VII U.S. National Congress on Computational Mechanics, USACM, Albuquerque, NM, USA, July 27-31, 2003.
  93. C.L. Bottasso, A. Croce, `Inverse Dynamic Analysis of Multibody Systems using an Energy Preserving Direct Transcription Method', ECCOMAS Multibody Dynamics 2003, IDMEC/IST, Lisbon, Portugal, July 1-4, 2003.
  94. C.L. Bottasso, L. Trainelli, `An Attempt at the Classification of Energy Decaying Schemes for Structural and Multibody Dynamics', ECCOMAS Multibody Dynamics 2003, IDMEC/IST, Lisbon, Portugal, July 1-4, 2003.
  95. C.L. Bottasso, `Aeroelastic Simulation of Tilt-Rotors using Non-Linear Finite Element Multibody Procedures', Second M.I.T. Conference on Computational Fluid and Solid Mechanics, Massachusetts Institute of Technology, Cambridge, MA, USA, June 17-20, 2003.
  96. C.L. Bottasso, D. Detomi, `Plain Galerkin Schemes that Work Well for the Advection-Diffusion Problem', Second M.I.T. Conference on Computational Fluid and Solid Mechanics, Massachusetts Institute of Technology, Cambridge, MA, USA, June 17-20, 2003.
  97. C.L. Bottasso, D. Detomi, `Generation and Refinement of Anisotropic Tetrahedral and Hybrid Grids in Three Dimensions', ANISGRID 2002, Politecnico di Milano, Milano, Italy, June 21, 2002.
  98. C.L. Bottasso, L. Trainelli, P. Abdel-Nour, G. Labò, `Tilt Rotor Analysis and Design using Finite Element Multibody Procedures', 28th European Rotorcraft Forum, Bristol, England, September 17-20, 2002.
  99. C.L. Bottasso, D. Detomi, `Procedures for the Refinement and Generation of Anisotropic Tetrahedral Grids in Three-Dimensional Domains', SIMAI 2002, Chia, CA, Italy, May 27-31, 2002.
  100. C. L. Bottasso, P. Causin, S. Micheletti, R. Sacco, `A Discontinuous Petrov-Galerkin Method: Application to the Elasticity and Advection-Diffusion Models', SIMAI 2002, Chia, CA, Italy, May 27-31, 2002.
  101. C.L. Bottasso, A. Croce, `A Direct Transcription Method for the Solution of Inverse Dynamics and Trajectory Optimization Problems of Multibody Systems', SIMAI 2002, Chia, CA, Italy, May 27-31, 2002.
  102. C.L. Bottasso, `Multiscale Integration of Initial Value Problems', SIMAI 2002, Chia, CA, Italy, May 27-31, 2002.
  103. C.L. Bottasso, M. Borri, L. Trainelli, `Robust Finite Element Simulation of Complex Multibody Systems', ECMI, Numerical Methods in Multibody Dynamics, Bad Herrenalb, Germany, October 3-5, 2001.
  104. C.L. Bottasso, `Solving Inverse and Trajectory Optimization Problems in Multibody Dynamics', Euromech Colloquium No. 427, Computational Techniques and Applications in Nonlinear Dynamics of Structures and Multibody Systems, Cachan, France, September 24-27, 2001.
  105. C.L. Bottasso, D. Detomi, `Tetrahedral Boundary Layer Mesh Generation for Viscous Flows in Complex Geometries', XVI Congresso Nazionale AIDAA, Palermo, Italy, September 24-28, 2001.
  106. C.L. Bottasso, O.A. Bauchau, L. Trainelli, `On the Modeling of Rotorcraft Systems using Finite Element Multibody Dynamics', XVI Congresso Nazionale AIDAA, Palermo, Italy, September 24-28, 2001.
  107. C.L. Bottasso, O.A. Bauchau, `Finite Element Multibody Modeling of Rotorcraft Systems', 27th European Rotorcraft Forum, Moscow, Russia, September 11-14, 2001.
  108. O.A. Bauchau, J.Y. Choi, C.L. Bottasso, `On the Modeling of Shells in Multibody Dynamics', DETC'01, 18th Biennal Conference on Mechanical Vibration and Noise, ASME Design Engineering Technical Conferences, Pittsburgh, PA, USA, September 9-12, 2001. Paper DETC2001/VIB-21339.
  109. C.L. Bottasso, P. Causin, S. Micheletti, R. Sacco, `The Discontinuous Petrov-Galerkin Method', VI U.S. National Congress on Computational Mechanics, USACM, Dearborn, MI, USA, July 31 - August 4, 2001.
  110. C.L. Bottasso, O.A. Bauchau, `Geometrically Exact Shells Dynamics by an Energy Decaying Scheme', VI U.S. National Congress on Computational Mechanics, USACM, Dearborn, MI, USA, July 31 - August 4, 2001.
  111. O.A. Bauchau, C.L. Bottasso, `A General Purpose Multibody Code Based on Conserving/Dissipating Algorithms', VI U.S. National Congress on Computational Mechanics, USACM, Dearborn, MI, USA, July 31 - August 4, 2001.
  112. C.L. Bottasso, `Inverse Dynamic Analysis and Trajectory Optimization of Multibody Systems', VI U.S. National Congress on Computational Mechanics, USACM, Dearborn, MI, USA, July 31 - August 4, 2001.
  113. O.A. Bauchau, J.Y. Choi, C.L. Bottasso, `An Energy Decaying Scheme for Nonlinear Dynamics of Shells', Proceeding of the Second European Conference on Computational Mechanics, Volume 1, pp. 44-45, Cracow, Poland, June 26-29, 2001.
  114. O.A. Bauchau, C.L. Bottasso, `An Energy Decaying Scheme for Nonlinear Dynamics of Shells', First M.I.T. Conference on Computational Fluid and Solid Mechanics, Massachusetts Institute of Technology, Cambridge, MA, USA, June 12-14, 2001.
  115. M. Borri, C.L. Bottasso, L. Trainelli, `An Index Reduction Method in Non-Holonomic Systems Dynamics', First M.I.T. Conference on Computational Fluid and Solid Mechanics, Massachusetts Institute of Technology, Cambridge, MA, USA, June 12-14, 2001.
  116. M. Borri, C.L. Bottasso, L. Trainelli, `On the Importance of Some Algorithmic Aspects of Multibody Dynamics for Complex Applications', First M.I.T. Conference on Computational Fluid and Solid Mechanics, Massachusetts Institute of Technology, Cambridge, MA, USA, June 12-14, 2001.
  117. C.L. Bottasso, O.A. Bauchau, `Beyond Geometric Integration: Application to Shell Dynamics', GIMC 2000, XIII Convegno Italiano di Meccanica Computazionale, Università degli Studi di Brescia, Brescia, Italy, November 13-15, 2000.
  118. C.L. Bottasso, O.A. Bauchau, `Multibody Modeling of Engage and Disengage Operations of Helicopter Rotors', Proceedings the AHS Rotorcraft Dynamics and Aeromechanics Specialists' Meeting, Atlanta GA, USA, November 13-14, 2000.
  119. C.L. Bottasso, S. Micheletti, R. Sacco, `Continuous and Discontinuous Dual-Primal Mixed Finite Elements for Elliptic Problems', 11th ECMI (European Consortium for Mathematics in Industry) Conference, Torre Normanna, Altavilla Milicia (Palermo), Italy, September 26-30, 2000.
  120. C.L. Bottasso, O.A. Bauchau, `Robust Integration Schemes for Flexible Multibody Systems', 20th International Congress of Theoretical and Applied Mechanics, Chicago, USA, August 27-September 2, 2000.
  121. M. Borri, C.L. Bottasso, L. Trainelli, `A Novel Momentum-Preserving Energy-Decaying Algorithm for Finite Element Multibody Procedures', Computational Aspects of Nonlinear Structural Systems with Large Rigid Body Motion, NATO Advanced Research Workshop, Pultusk, Poland, July 2-7, 2000, pp. 549-568.
  122. M. Borri, C.L. Bottasso, L. Trainelli, `An Embedded Projection Method for Constrained Dynamics', Computational Aspects of Nonlinear Structural Systems with Large Rigid Body Motion, NATO Advanced Research Workshop, Pultusk, Poland, July 2-7, 2000, pp. 577-588.
  123. O.A. Bauchau, C.L. Bottasso, L. Trainelli, `Robust Integration Schemes for Flexible Multibody Systems', Computational Aspects of Nonlinear Structural Systems with Large Rigid Body Motion, NATO Advanced Research Workshop, Pultusk, Poland, July 2-7, 2000, pp. 61-89.
  124. O.A. Bauchau, C.L. Bottasso, `Contact Conditions for Cylindrical, Prismatic, and Screw Joints in Flexible Multi-Body Systems', proceedings of the 41th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Atlanta, GA, USA, April 3-6, 2000.
  125. C.L. Bottasso, P. Citelli, A. Taldo, C.G. Franchi, `Unilateral Contact Modeling with ADAMS', International ADAMS Users' Conference, Berlin, Germany, November 17-18, 1999.
  126. O.A. Bauchau, C.L. Bottasso, `On the Modeling of Variable Diameter Tilt Rotor Aircraft', 8th ARO Workshop on Aeroelasticity of Rotorcraft Systems, State College, PA, USA, October 18-20, 1999.
  127. C.L. Bottasso, M. Borri, L. Trainelli, `Progettare Integratori che "Capiscono" le Equazioni: il Caso dei Sistemi Multicorpo Flessibili' (in italian), GIMC 98, XI Convegno Italiano di Meccanica Computazionale, Trento, Italy, July 13-15, 1998.
  128. C.L. Bottasso, M. Borri, `Some Recent Developments in the Theory of Finite Elements in Time', International Conference on Computational Engineering Science, Atlanta, GA, USA, October 6-9, 1998.
  129. M. Borri, C.L. Bottasso, L. Trainelli, `Integrating Elastic Multibody Systems: Manifolds, Invariants and Non-Linear Stability', IV World Congress on Computational Mechanics, Buenos Aires, Argentina, June 29 - July 2, 1998.
  130. M. Borri, C.L. Bottasso, L. Trainelli, `Nonlinear Unconditional Stability in the Integration of Flexible Multibody Systems', SIMAI 98, Giardini Naxos, Italy, June 1-5, 1998.
  131. C.L. Bottasso, `Metodi ad Elementi Finiti Paralleli ed Adattativi per CFD', Workshop CILEA "Il Calcolo ad Alte Prestazioni in Italia", Università degli Studi, Milano, Italy, October 9-10, 1997.
  132. C.L. Bottasso, M. Borri, L. Trainelli, `Energy Preserving/Decaying Schemes for Non-Linear Elastic Multibody Systems', Seventh International Workshop on Dynamics and Aeroelastic Stability Modeling of Rotorcraft Systems, Washington University, St. Louis, MO, USA, October 14-16, 1997.
  133. C.L. Bottasso, M. Borri, L. Trainelli, `Algoritmi Conservativi/Dissipativi per Sistemi Multicorpo Flessibili Non-Lineari', Congresso Nazionale AIDAA, Napoli, Italy, October 21-24, 1997.
  134. C.L. Bottasso, M. Borri, L. Trainelli, `Energy Preserving/Decaying Schemes for Holonomic/Non-Holonomic Non-Linear Multibody Systems', Fourth U.S. National Congress on Computational Mechanics, USACM, San Francisco, CA, USA, August 5-8, 1997.
  135. H. Murty, C.L. Bottasso, M. Dindar, M.S. Shephard, O.A. Bauchau, `Aeroelastic Analysis of Rotor Blades using Nonlinear Fluid/Structure Coupling', Proceedings of the American Helicopter Society 53st Annual Forum and Technology Display, Virginia Beach, VA, pp 1788-1798, April 29 - May 1, 1997.
  136. C.L. Bottasso, M.S. Shephard, `Parallel Adaptive Finite Element Solution of Helicopter Rotors in Hover', 22nd European Rotorcraft Forum, Brighton, UK, September 16-19, 1996.
  137. C.L. Bottasso, J.E. Flaherty, C. Özturan, M.S. Shephard, B.K. Szymanski, J.D. Teresco, L.H. Ziantz, `The Quality of Partitions Produced by an Iterative Load Balancer', Third Workshop on Languages, Compilers, and Runtime Systems for Scalable Computers, Rensselaer Polytechnic Institute, Troy, NY, May 22-24, 1995.
  138. M.S. Shephard, C.L. Bottasso, `Parallel Automated Adaptive Finite Element Solution Techniques', Third U.S. National Congress on Computational Mechanics, USACM, Dallas, TX, USA, June 12-14, 1995.
  139. C.L. Bottasso, M.S. Shephard, `A Parallel Adaptive Finite Element Euler Flow Solver for Rotary Wing Aerodynamics', 12th AIAA Computational Fluid Dynamics Conference, San Diego, CA, USA, June 19-22, 1995.
  140. O.A. Bauchau, C.L. Bottasso, H. Murty, Z. Rusak, M.S. Shephard, `Aeroelastic Stability of Rotor Blades using a Parallel Adaptive Finite Element Flow Solver', Aeromechanics Technology and Product Design for the 21st Century Conference, Fairfield, CT, USA, October 11-13, 1995.
  141. O.A. Bauchau, C.L. Bottasso, H. Murty, M.S. Shephard, `Unsteady Aerodynamics and Aeroelastic Stability of Rotor Blades using a Parallel Adaptive Finite Element Solver', Sixth International Workshop on Dynamics and Aeroelastic Stability Modeling of Rotorcraft Systems, UCLA, Los Angeles, CA, USA, November 8-10, 1995.
  142. M. Borri, C.L. Bottasso, T. Merlini, `Some Requirements of Rotorcraft Modeling', Sixth International Workshop on Dynamics and Aeroelastic Stability Modeling of Rotorcraft Systems, UCLA, Los Angeles, CA, USA, November 8-10, 1995.
  143. C.L. Bottasso, H.L. de Cougny, M. Dindar, J.E. Flaherty, C. Özturan, Z. Rusak, M.S. Shephard, `Compressible Aerodynamics using a Parallel Adaptive Time-Discontinuous Galerkin Least-Squares Finite Element Method', 12th Applied Aerodynamics Conference, Colorado Springs, CO, USA, June 20-22, 1994.
  144. C.L. Bottasso, H.L. de Cougny, J.E. Flaherty, C. Özturan, M.S. Shephard, `Parallel Adaptive Finite Element Analysis', IACM Third World Congress for Computational Mechanics, Extended Abstracts, Int. Assoc. for Computational Mechanics, Vol.2, 1796-1797, 1994.
  145. F. Bernelli-Zazzera, M. Borri, C.L. Bottasso, `Studio della Dinamica Inversa di un Velivolo Rigido Mediante Elementi Finiti nel Tempo', XII Congresso Nazionale AIDAA, Como, Italy, July 20-23, 1993, in italian.
  146. M. Borri, C.L. Bottasso, F. Montelaghi, `Helicoidal Approximation for Beam Statics and Rigid Body Dynamics', 5th International Workshop on Dynamics and Aeroelastic Stability Modeling of Rotorcraft Systems, Rensselaer Polytechnic Institute, Troy, NY, USA, October 18-20, 1993.
  147. M. Borri, C.L. Bottasso, P. Mantegazza, `Basic Features of the Time Finite Element Approach for Dynamics', International Technical Specialists Meeting on Rotorcraft Basic Research, Georgia Institute of Technology, Atlanta, GA, USA, March 25-27, 1991.
  148. M. Borri, C.L. Bottasso, P. Mantegazza, `A New Form of the Lagrange Multipliers in Constrained Multibody Dynamics', Euromech, 1st European Solid Mechanics Conference, München, Germany, September 9-13, 1991.
  149. M. Borri, C.L. Bottasso, P. Mantegazza, `A Modified Phase Space Formulation for Constrained Mechanical Systems - Differential Approach', 4th Workshop on Dynamics and Aeroelastic Stability Modeling of Rotorcraft Systems, University of Maryland, College Park, MD, USA, November 19-21, 1991.
  150. C.L. Bottasso, A.E. Finzi, P. Mantegazza, `A Possible on Orbit Dynamic Identification of Large Space Structures by Photogrammetric Techniques', 40th Congress of the International Astronautical Federation, Malaga, Spain, October 7-12, 1989.
  151. C.L. Bottasso, A.E. Finzi, `Identificazione Dinamica di Grandi Strutture Spaziali: Calcolo Vettoriale e Prestazioni in Real-Time', Supercomputing Tools for Science and Engineering, Pisa, Italy, December 4-7, 1989, in italian.

OTHER PUBLICATIONS

  1. C.L. Bottasso, F. Campagnolo, A. Croce, `Computational Procedures for the Multi-Disciplinary Constrained Optimization of Wind Turbines', Scientific Report DIA-SR 10-02, Dipartimento di Ingegneria Aerospaziale, Politecnico di Milano, January 2010.
  2. C.L. Bottasso, A. Croce, D. Devecchi, C.E.D. Riboldi, `Multi-Layer Control Architecture for the Reduction of Deterministic and Non-Deterministic Loads on Wind Turbines', Scientific Report DIA-SR 10-01, Dipartimento di Ingegneria Aerospaziale, Politecnico di Milano, January 2010.
  3. C.L. Bottasso, F. Luraghi, G. Maisano, `Time-Domain Parameter Estimation for First-Principle Rotorcraft Models using Recursive and Batch Procedures: Formulation and Preliminary Results', Scientific Report DIA-SR 09-05, Dipartimento di Ingegneria Aerospaziale, Politecnico di Milano, April 2009.
  4. C.L. Bottasso, A. Croce, `Power Curve Tracking with Tip Speed Constraint using LQR Regulators', Scientific Report DIA-SR 09-04, Dipartimento di Ingegneria Aerospaziale, Politecnico di Milano, March 2009.
  5. C.L. Bottasso, A. Croce, ‘Advanced Control Laws for Variable-Speed Wind Turbines and Supporting Enabling Technologies’, Scientific Report DIA-SR 09-01, Dipartimento di Ingegneria Aerospaziale, Politecnico di Milano, January 2009.
  6. C.L. Bottasso, A. Croce, ‘Cascading Kalman Observers of Structural Flexible and Wind States for Wind Turbine Control’, Scientific Report DIA-SR 09-02, Dipartimento di Ingegneria Aerospaziale, Politecnico di Milano, January 2009.
  7. C.L. Bottasso, A. Croce, R. Nicastro, L. Riviello, B. Savini, ‘Adaptive Reference-Augmented Predictive Control, with Application to the Reflexive Control of Unmanned Rotorcraft Vehicles’, Scientific Report DIA-SR 08-09, Dipartimento di Ingegneria Aerospaziale, Politecnico di Milano, June 2008.
  8. C.L. Bottasso, ‘Solution Procedures for Maneuvering Multibody Dynamics Problems for Vehicle Models of Varying Complexity’, Scientific Report DIA-SR 08-10, Dipartimento di Ingegneria Aerospaziale, Politecnico di Milano, June 2008.
  9. C.L. Bottasso, D. Leonello, B. Savini, ‘Path Planning for Autonomous Vehicles by Trajectory Smoothing using Motion Primitives’, Scientific Report DIA-SR 08-11, Dipartimento di Ingegneria Aerospaziale, Politecnico di Milano, June 2008.
  10. C.L. Bottasso, G. Maisano, ‘Software Implementation of Numerical Procedures for the Trajectory Optimization of Rotorcraft Vehicles’, Scientific Report DIA-SR 07-02, Dip. Ingegneria Aerospaziale, Politecnico di Milano, 2007.
  11. C.L. Bottasso, A. Croce, D. Leonello, L. Riviello, `Unsteady Trim for the Simulation of Maneuvering Rotorcraft with Comprehensive Models', Scientific Report DIA-SR 05-02, Dip. Ingegneria Aerospaziale, Politecnico di Milano, 2005.
  12. C.L. Bottasso, P. Causin, R. Sacco, `Flux-Upwind Stabilization of the Discontinuous Petrov-Galerkin Formulation with Lagrangian Multipliers for Advection-Diffusion Problems', INRIA, Institut National de Recherche en Informatique et en Automatique, Rapport de Recherche n. 5157, March 2004.
  13. C.L. Bottasso, S. Micheletti, R. Sacco,`Discontinuous Dual-Primal Mixed Finite Elements for Elliptic Problems', ICASE Report No. 2000-37, Institute for Computer Applications in Science and Engineering, NASA Langley Research Center, Hampton, VA, USA, October, 2000.
  14. A. Taldo, P. Citelli, C.L. Bottasso, `A General Approach to the Simulation of Contact/Impact using Arbitrary Curves and Surfaces in ADAMS', Scientific Report DIA-SR 99-10, Dip. Ingegneria Aerospaziale, Politecnico di Milano, 1999.
  15. C.L. Bottasso, `Symplectic Runge-Kutta Processes for SO(3) Invariant Hamiltonians', Scientific Report DIA-SR 97-06, Dip. Ingegneria Aerospaziale, Politecnico di Milano, 1997.
  16. C.L. Bottasso, M.S. Shephard, `Automated Unstructured Multi-Level Adaptive Techniques for the Finite Element Solution of the Compressible Euler Equations', Scientific Report DIA-SR 96-01, Dip. Ingegneria Aerospaziale, Politecnico di Milano, 1996.
  17. C.L. Bottasso, M. Dindar, H.L. de Cougny, C. Özturan, Z. Rusak, M.S. Shephard, `Simulation of a Lifting Rotor in Hover using a Parallel Adaptive Finite Element Flow Solver', Scientific Report DIA-SR 96-02, Dip. Ingegneria Aerospaziale, Politecnico di Milano, 1996.
  18. C.L. Bottasso, M.S. Shephard, `Adaptive Implicit Multigrid FEM for the Compressible Euler Equations', Scientific Report DIA-SR 96-03, Dip. Ingegneria Aerospaziale, Politecnico di Milano, 1996.
  19. C.L. Bottasso, `Alcuni Aspetti Algoritmici in Meccanica Computazionale - Verso una Simulazione Numerica dell'Elicottero', Ph.D. Thesis, D.D.R. 0194, Dip. Ingegneria Aerospaziale, Politecnico di Milano, 1993, in italian.
  20. C.L. Bottasso, `Formulazioni Multicorpo agli Elementi Finiti per la Dinamica dell'Elicottero', Memoria n. 93-VII, Dip. Ingegneria Aerospaziale, Politecnico di Milano, 1993, in italian.
  21. C.L. Bottasso, `Valutazione Preliminare del Programma di Analisi ad Elementi Finiti I/FEM: Analisi Lineare Statica ed Analisi Modale', Memoria Utev/Str/15/90, AerMacchi S.p.A., 1990, in italian.

PATENTS 

  1. C.L. Bottasso, F. Castoldi, R. Gilardi, `Velivolo, Mono o Biposto, Ultraleggero Compatto a Minimo Ingombro, con Decollo e Atterraggio Verticale', Pat. No. MI2006A002174, November 13, 2006.
  2. C.L. Bottasso, C.G. Franchi, `Method for Modeling Contacts/Impacts Among Curves and Surfaces', Pat. No. MI1999A002673, 1999.

Politecnico di Milano, Dipartimento di Ingegneria Aerospaziale, Campus Bovisa, Via La Masa 34, I-20156 Milano, Italy. URL: www.polimi.it, www.aero.polimi.it 

Last modified: April 14, 2010