Chi Siamo

Didattica

Ricerca

Collabora

Persone

Magazine Contatti
EN

Inizio

Maggio 2017

Fine

Maggio 2020

Status

Completato

H2020 | SMS - Smart Morphing and Sensing

Inizio

Maggio 2017

Fine

Maggio 2020

Status

Completato

Smart Morphing & Sensing is a multidisciplinary project associating novel electroactive actuators and sensors to increase aerodynamic efficiency and attenuate vibrations and noise. This is achieved via aerostructural morphing exploiting the real-time information from the distributed actuation and sensing systems. This goal is achieved by actuating the smart-materials to deform the structure according to optimum shape design by means of Flight Control Commands. The novel “intelligent material” technology is a hybrid association of small piezo-actuators distributed along the control surface, of Shape Memory Alloys and of Electroactive Polymers, disposed under the ‘skin’ of the active structure. This novel hybrid design allows associating fast time response and vibrational actuation with simultaneous high deformation ability. The ability in capturing energy from the already existing vibrations and redistributing it in the actuation will be used to partially supply the system and therefore ensure an economic and realistic morphing. This is beyond the cutting edge of the state of the art in morphing concepts. The use of novel distributed pressure sensors based on fiber Bragg grating provides real-time information on the actuation performance and the flight situation enabling an efficient in-situ optimization using a dedicated controller interfacing the actuators with the fiber based sensors. Aerodynamic and structural experiments are included to demonstrate the abilities of the new integrated smart sensing and morphing design via real-time actuation. High-fidelity aeroelastic computations are used to optimize the actuators location and function. The experiments will study the increase of the aerodynamic efficiency in cruise, take-off and landing by controlling the turbulence structure responsible for noise and vibration. The main configuration will be based on the Airbus A320 type wing with morphing flap.

Scheda progetto

Program

Horizon 2020

SubProgram

Pillar III - Societal Challenge

Call

H2020-MG-2016-Two-Stages

Topic

MG-1.1-2016 - Reducing energy consumption and environmental impact of aviation

Start date

01-05-2017 | Length: 36 months